LC1500/C90 Display Stand

for use with Cobra Highway Bars

Our Stand works with the Standard Corba Bars
AND the
Cobra Fatty Bar
(To see pictures of the Stand with the Fatty Bars click HERE)

Display Stands are not interchangeable
between bikes using different Highway Bars.

The Cobra Version is the one pictured on
the home page installed on my '01 LC.

 

 

 

Click to see Installation Instructions

 

The Standard Cobra and the
Cobra Fatty Version of the
LC1500/C90 Display Stand
sells for $150.00
This includes shipment to all lower 48 states.
For shipment to other locations contact me for actual costs.

To purchase the Standard Cobra Version (not Fatty) of the Display Stand
click the PayPal button below.

 

To Purchase the Display Stand for use with Cobra Fatty Bars
Click the PayPal button below.

 

T o purchase any stand using a money order or check
click here for information.

 

There are a couple of things that are
unique to the Cobra Version:

1.
You cannot remove the chrome
oil filter cover without droping one side of the display stand.

Workaround: Remove the chrome cover before installation
of the stand. Leave it off.

OR

Leave it on and when you need to change filters remove the
right side mounting bolt for the stand and the cover will slip right off.
While the stand is down remove the filter and replace with a new one.

2.
With the stand installed the filter must be removed through the
hole on the right side between the shifter and the frame.
Lay a rag over the frame and floorboard mount
to catch any dripped oil. The filter slips right through. Or # 1 above.

 

***
If you have install problems and
can't get your stand to swing
up and down freely then
read this link.